BRULIN AND CO INC -- BRULIN MP 1793 WIPES  -- 6850-01-466-6157
<pre>=====================  Product Identification  =====================

Product ID:BRULIN MP 1793 WIPES
MSDS Date:04/16/1998
FSC:6850
NIIN:01-466-6157
Status Code:A
=== Responsible Party ===
Company Name:BRULIN AND CO INC
Address:2920 DR ANDREW J BROWN AVE
Box:270
City:INDIANAPOLIS
State:IN
ZIP:46205-0270
Country:US
Info Phone Num:317-923-3211
Emergency Phone Num:317-923-3211
Resp. Party Other MSDS Num.:PRODUCT NO: 304030
Chemtrec Ind/Phone:(800)424-9300
CAGE:94058
=== Contractor Identification ===
Company Name:BRULIN AND CO INC
Address:2920 DR ANDREW J BROWN AVE
Box:270
City:INDIANAPOLIS
State:IN
ZIP:46205-0270
Country:US
Phone:317-923-3211
CAGE:94058

=============  Composition/Information on Ingredients  =============

Ingred Name:ISOPARAFFINIC HYDROCARBON
CAS:64742-47-8
RTECS #:OA5504000
Minumum % Wt:10.
Maxumum % Wt:20.

Ingred Name:ISOPARAFFINIC HYDROCARBON
CAS:64742-48-9
Minumum % Wt:80.
Maxumum % Wt:90.

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: PROLONGED OR REPEATED SKIN
    CONTACT MAY CAUSE IRRITATION. HIGH VAPOR CONCENTRATIONA ARE
    IRRITATING TO THE EYES & RESPIRATORY TRACT, & MAY PRODUCE CENTRAL
    NERVOUS SYSTEM EFFECTS. DIRECT EYE CONTA CT MAY CAUSE IRRITATION.
    CHRONIC: CHRONIC SKIN EXPOSURE MAY CAUSE DEFATTING OF THE SKIN &
    LEAD TO DERMATITIS.
Effects of Overexposure:EYE & SKIN IRRITATION SEEN AS REDNESS.
    EXCESSIVE INHALATION MAY CAUSE HEADACHE, DIZZINESS, NUMBNESS
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH LG AMOUNTS OF WATER FOR 15 MINS LIFTING UPPER
    & LOWER LIDS OCCASIONALLY. GET MEDICAL ATTENTION. INHALATION:
    REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. 
    SKIN: WAS H WITH MILD SOAP & WATER. REMOVE CONTAMINATED CLOTHING &
    LAUNDER BEFORE REUSE. INGESTION: DO NOT INDUCE VOMITING. KEEP WARM
    QUIET & GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:=61.1C, 142.F
Lower Limits:1.3
Upper Limits:8.6
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS SHOULD BE
    PROVIDED FOR PERSONNEL. WATER FOG MAY ALSO BE USED TO COOL CLOSED
    CONTAINERS.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH NEAR
    PRODUCT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NOT APPLICABLE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BETWEEN 0 AND 120 DEG F.
Other Precautions:MAY HAZE SOME PLASTICS. NOT FOR USE ON HOT SURFACES.
    BRULIN MP 1793 WIPES ARE AN INDUSTRIAL PRODUCT, NOT INTENDED FOR
    HOME USE. THIS PRODUCT IS AUTHORIZED BY THE USDA FOR USE IN
    FEDERALLY INSPECTED ME AT AND POULTRY PLANTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF SIGNS & SYMPTOMS OF EXPOSURE ARE NOTED, USE
    NIOSH/MSHA APPROVED RESPIRATOR. CONSULT YOUR SAFETY EQUIPMENT
    SUPPLIER FOR RECOMMENDATIONS.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS SUFFICIENT.
Protective Gloves:RECOMMENDED.
Eye Protection:RECOMMENDED.
Other Protective Equipment:NONE.
Work Hygienic Practices:AVOID INHALATION OF VAPORS. WASH HANDS AFTER
    HANDLING.
Supplemental Safety and Health
CAUTION. DIRECT EYE CONTACT MAY CAUSE IRRITATION. PROLONGED OR REPEATED
    SKIN CONTACT MAY CAUSE IRRITATION. WASH THOROUGHLY AFTER HANDLING.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:360 TO 405 DEG F
Melt/Freeze Pt:<-60.C, -76.F
Vapor Pres:APPROX 1 MMHG @ 68 DEG F
Vapor Density:5.8(AIR=1)
Evaporation Rate &amp; Reference:0.05 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE TOWLETTE, VERY MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS OR BASES.
Stability Condition to Avoid:.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
    OF AIR MAY YIELD CARBON MONOXIDE, CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE ACCORDING TO FEDERAL, STATE & LOCAL LAWS
    & 40 CFR.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.