TAYLOR TECHNOLOGIES INC -- TDS RESIN, R-0809  -- 6810-00N062188
<pre>=====================  Product Identification  =====================

Product ID:TDS RESIN, R-0809
MSDS Date:02/01/1992
FSC:6810
NIIN:00N062188
=== Responsible Party ===
Company Name:TAYLOR TECHNOLOGIES INC
Address:31 LOVETON CIRCLE
City:SPARKS
State:MD
ZIP:21152
Country:US
Info Phone Num:410-472-4340
Emergency Phone Num:410-472-4340
CAGE:EO526
=== Contractor Identification ===
Company Name:TAYLOR TECHNOLOGIES INC
Address:31 LOVETON CIRCLE
City:SPARKS
State:MD
ZIP:21152-9201
Country:US
Phone:410-472-4340
CAGE:EO526
Company Name:TAYLOR TECHNOLOGIES,  INC
Address:31 LOVETON CIRCLE
Box:City:SPARKS
State:MD
ZIP:21152
Phone:401-472-4340
CAGE:89975

=============  Composition/Information on Ingredients  =============

Ingred Name:SULFONATED POLYSTYRENE
Fraction by Wt: 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN:IRRITANT. INGEST:IRRITANT.
    MAY CAUSE GASTROINTESTINAL IRRITATION. INHAL:NOT APPLICABLE. TARGET
    ORGAN(S):EYES, SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EYE & SKIN CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
    RESP) . EYES:IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINUTES.
    CALL MD. SKIN:WASH THOROUGHLY W/SOAP & WATER. INGEST:GIVE LARGE
    AMOUNT S OF WATER. CALL MD. INDUCE VOMITING UNDER DIRECTION OF MD.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP. CONTAINERIZE FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:COOL, DRY AREA. AVOID DIRECT SUNLIGHT.
Other Precautions:AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID
    BREATHING CHEMICAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:GENERAL PURPOSE GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Spec Gravity:1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID, DARK AMBER BEADS; NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:EXTREME HEAT, TEMPERATURE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL TO COMPLY WITH ALL LOCAL, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.